A black natural basalt panel with hints of rust add to the stones rustic appearance
The TIER® panels rise in interlocking ‘tiers’, fitting seamlessly together, eliminating the need for specialist labour and making this system a quick and easy system to use. Each individual piece of stone is stuck together with a resin (no cement backing).
The Contemporary Range is a thin stone veneer made from split face stone. The various depths and textures showcase the stones natural beauty. This three-dimensional look creates a stunning feature wall especially when illuminated. TIER® natural stone panel system is ideal for exterior features walls, courtyards and entertainment areas. Equally well suited for interior use, these stone panels are also perfect for use on fireplaces and features walls. Due to its modular form TIER Contemporary is quick and easy to install.
The Contemporary Range comes with separate corners. The corners are designed and manufactured in a way to achieve the most authentic corner possible. Each corner piece slides seamlessly together to form a realistic stone corner.
Panels are 548mm long x 152mm high x 25mm thick approx.
Corner panels are 348mm and 200mm long x 152mm high x 25mm thick approximately (comes in 2 pieces).
Packaging Panels & Corners
- Both panel & corner boxes contain 0.33m²
- Panels – 4 panels/box
- Corners – 4 long & 4 short corner pieces/box – Measure height of corners to calculate quantity
- Approx. weight per box 20kg
- Approx. weight per m² 55kg
We can also supply you with the recommended Tier adhesive, building board, sealants, cleaners and mechanical fixings.
Mechanical Fixing is recommended in conjunction with the suggested adhesive to areas of panel fitted above 3 metres from ground level.
Suitable substrates for panelling:
- New or existing concrete or block work structures
- Tier® Building Board screwed to a Timber Frame Structure
- Tier® Building Board screwed to Steel Frame uprights
Tier Charcoal Panel System – Contemporary
Ensure all surfaces are structurally sound, between 40º F (4ºC) and 90º F (32ºC), and free from all dirt, oil, grease, paint and concrete sealers or curing compounds
NOTE: Only install TIER products on the following suitable substrates:
- Traditional unfinished Block Work
- Concrete (Scratch surface if very smooth)
- TIER Building Board
Find the level of the first full height row of panels by dividing the height of the surface by 215mm (the height of each panel), it is good practice to have the cut panels at the bottom of the wall. Until the adhesive has fully set the first row of panel will require temporary support. A straight edge (normally a timber lath) should be fixed to the substrate to proved support and a level starting guide .